console gauge

With a brand new design, the EVO LINE is the third generation of SPG mini line gauge boot. Thanks to a special processing of the mold, the EVO LINE cover is much more softer and comfortable, but at the same time it has a higher grip and a stronger impact resistance. The EVO LINE is very easy to read and its rounded profile brings out its ergonomic shape and exalts its proficiency.

All one piece brass body; Copper Beryllium spiral wound; Bourdon tube; Polycarbonate transparent window; Plastic cover with loop for fixing; Graduation 400 BAR / 5000 PSI, full scale.

Luminous easy to read dial design; Red zone from 0 to 50 BAR / 0 to 600 PSI; Increments 10 BAR / 100 PSI, all over the scale.

mybizcart_2023-03-14607

Single Pressure Gauge

The mini pressure gauge is a small, light-weight gauge that has been specifically designed to avoid excessive strain on the HP hose that connects to the first stage of the regulator.
The instrument has a metal case in chromium plated brass and is therefore extremely strong. The front glass is made so that it also acts as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape.
The luminescent dial is calibrated up to 350 in the metric version and 5000 psi in the imperial one. The area below 50 is highlighted in red, the one between 50 and 200 is green and that from 200 to the end of the scale is light blue.
The instrument is housed in a small, modern shaped console, made from polycarbonate and, two materials that guarantee protection from shocks and scratches and which, at the same time, are very light.
In the upper part of the protective shell there is a loop for fastening the instrument to the jacket so that it does not hang down with the risk of catching and damaging the environment.
  • Case material: chromium plated brass
  • End scale: 350 bar or 5000 psi
  • Face: luminescent with sections
  • Pressure release valve: incorporated
  • Instrument diameter: 50 mm
  • Height of case: 14 mm
  • Total instrument height: 17 mm
  • Hose diameter: 11 mm
  • Shop Now

    Mini Consol Gauge Consol 2

  • Pressure gauge and depth-gauge on the front
  • Maximum pressure: 400BAR (5000PSI)
  • Maximum depth: 70M (220ft)
  • Luminous dial face
  • Encased in a durable boot
  • 150M (500ft) depth-resisting glass
  • Metrical Graduation (-BAR) or Imperial
  • Graduation (-PSI)
  • In compliance with CE UNI EN250
  • Made in Italy
  • Shop Now
    Mini Consol Gauge Consol 2
    Mini Pressure Gauge Parts

    Mini Pressure Gauge Parts

  • Case material: chromium plated brass
  • End scale: 350 bar or 5000 psi
  • Face: luminescent with coloured sections
  • Pressure release valve: incorporated
  • Instrument diameter: 50 mm
  • Height of case: 14 mm
  • Total instrument height: 17 mm
  • Hose diameter: 11mm
  • Shop Now
    Product_14-09-2019-01-45-07_9654
    High Pressure Rubber Hose 6 inch / 15cm
    For gauges, combos, and consoles
    Length: 6” (15 cm)
    HP Hose NBR Rubber
    Male: 7/16-20
    Female: 7/16-20
    Working Pressure: 5000 psi / 207 bar
    Color: Black
    read more
    Product_14-09-2019-01-40-41_6287
    High Pressure Hose Braided 6 inch / 15cm
    High Pressure Hose
    Braided high pressure hose for pressure gauge
    Durable, flexible, soft, and lightweight
    Diameter 8mm
    Length 15cm / 6 inch"


    read more